⟁ Wyoming Well Data field records · 2026 survey

Wyoming Well Data › Washakie County

Washakie County, Wyoming: well depth, water level & drilling cost

✓ 2,258 State Engineer records through 2026-08-12 · checked 2026-09-28

60 ftmedian well depth
28 ft–200 fttypical depth range
15 ftmedian static water level
15 gpmmedian yield (2,143 tests)

Pull every recorded well near a Washakie County address — $49

How deep are wells in Washakie County, Wyoming?

The median drilled well depth in Washakie County is 60 ft, based on 1,650 wells with recorded depths in the state State Engineer database. Half of all wells fall between 28 ft and 200 ft; 90% are shallower than 570 ft. Wells on permits filed since 2016 have a median recorded depth of 185 ft.

How much does it cost to drill a well in Washakie County?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Washakie County?

The median static water level is 15 ft below ground surface (middle half of wells: 10 ft–40 ft), from 1,358 measurements.

How much water do wells in Washakie County produce?

The median tested yield is 15 gpm (middle half: 8 gpm–25 gpm), from 2,143 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 765 50–100 ft 199 100–150 ft 150 150–200 ft 103 200–300 ft 119 300–400 ft 71 400–600 ft 86 600+ ft 157
Looking at a specific property in Washakie County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Washakie County

Free. Goes to licensed drillers working Washakie County.

Well records by ZIP code in Washakie County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from State Engineer records (water well permits only — coalbed-methane, monitoring and test wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.