⟁ Wyoming Well Data field records · 2026 survey

Wyoming Well Data › Laramie County › Hillsdale (82060)

Hillsdale, WY (82060): well depth, water level & drilling cost

✓ 1,396 State Engineer records · Laramie County

270 ftmedian well depth
190 ft–340 fttypical depth range
99 ftmedian static water level
16 gpmmedian yield (1,299 tests)

Pull every recorded well near a Hillsdale (82060) address — $49

How deep are wells in and around Hillsdale (82060), Wyoming?

The median drilled well depth in and around Hillsdale (82060) is 270 ft, based on 1,017 wells with recorded depths in the state State Engineer database. Half fall between 190 ft and 340 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Hillsdale (82060)?

Applying published per-foot rates to the local median depth of 360 ft: drilling and casing alone typically runs $9,000–$23,400; a complete system including pump, pressure tank, and hookup typically runs $21,600–$36,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hillsdale (82060)?

The median static water level is 99 ft below ground surface (middle half of wells: 75 ft–125 ft), from 996 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 37 100–150 ft 104 150–200 ft 127 200–300 ft 314 300–400 ft 316 400–600 ft 107 600+ ft 8
Looking at a specific property in Hillsdale (82060)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hillsdale (82060)

Free. Goes to licensed drillers working Laramie County.

Part of Laramie County well records.

Method: medians computed from State Engineer records (water well permits only — coalbed-methane, monitoring and test wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.