⟁ Wyoming Well Data field records · 2026 survey

Wyoming Well Data › Goshen County › Hawk Springs (82217)

Hawk Springs, WY (82217): well depth, water level & drilling cost

✓ 522 State Engineer records · Goshen County

125 ftmedian well depth
80 ft–206 fttypical depth range
40 ftmedian static water level
12 gpmmedian yield (506 tests)

Pull every recorded well near a Hawk Springs (82217) address — $49

How deep are wells in and around Hawk Springs (82217), Wyoming?

The median drilled well depth in and around Hawk Springs (82217) is 125 ft, based on 396 wells with recorded depths in the state State Engineer database. Half fall between 80 ft and 206 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Hawk Springs (82217)?

Applying published per-foot rates to the local median depth of 125 ft: drilling and casing alone typically runs $3,125–$8,125; a complete system including pump, pressure tank, and hookup typically runs $7,500–$12,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hawk Springs (82217)?

The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–65 ft), from 369 measurements.

Drilled depth distribution

0–50 ft 45 50–100 ft 96 100–150 ft 78 150–200 ft 57 200–300 ft 78 300–400 ft 29 400–600 ft 13 600+ ft 0
Looking at a specific property in Hawk Springs (82217)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hawk Springs (82217)

Free. Goes to licensed drillers working Goshen County.

Part of Goshen County well records.

Method: medians computed from State Engineer records (water well permits only — coalbed-methane, monitoring and test wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.