⟁ Wyoming Well Data field records · 2026 survey

Wyoming Well Data › Hot Springs County › Kirby (82430)

Kirby, WY (82430): well depth, water level & drilling cost

✓ 646 State Engineer records · Hot Springs County

55 ftmedian well depth
33 ft–140 fttypical depth range
17 ftmedian static water level
20 gpmmedian yield (624 tests)

Pull every recorded well near a Kirby (82430) address — $49

How deep are wells in and around Kirby (82430), Wyoming?

The median drilled well depth in and around Kirby (82430) is 55 ft, based on 456 wells with recorded depths in the state State Engineer database. Half fall between 33 ft and 140 ft; 90% are shallower than 321 ft.

How much does it cost to drill a well in and around Kirby (82430)?

Applying published per-foot rates to the local median depth of 55 ft: drilling and casing alone typically runs $1,375–$3,575; a complete system including pump, pressure tank, and hookup typically runs $3,300–$5,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kirby (82430)?

The median static water level is 17 ft below ground surface (middle half of wells: 9 ft–31 ft), from 424 measurements.

Drilled depth distribution

0–50 ft 206 50–100 ft 100 100–150 ft 39 150–200 ft 32 200–300 ft 31 300–400 ft 12 400–600 ft 10 600+ ft 26
Looking at a specific property in Kirby (82430)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kirby (82430)

Free. Goes to licensed drillers working Hot Springs County.

Part of Hot Springs County well records.

Method: medians computed from State Engineer records (water well permits only — coalbed-methane, monitoring and test wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.