⟁ Wyoming Well Data field records · 2026 survey

Wyoming Well Data › Natrona County › Hiland (82638)

Hiland, WY (82638): well depth, water level & drilling cost

✓ 218 State Engineer records · Natrona County

250 ftmedian well depth
150 ft–400 fttypical depth range
92 ftmedian static water level
15 gpmmedian yield (212 tests)

Pull every recorded well near a Hiland (82638) address — $49

How deep are wells in and around Hiland (82638), Wyoming?

The median drilled well depth in and around Hiland (82638) is 250 ft, based on 151 wells with recorded depths in the state State Engineer database. Half fall between 150 ft and 400 ft; 90% are shallower than 600 ft.

How much does it cost to drill a well in and around Hiland (82638)?

Applying published per-foot rates to the local median depth of 250 ft: drilling and casing alone typically runs $6,250–$16,250; a complete system including pump, pressure tank, and hookup typically runs $15,000–$25,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hiland (82638)?

The median static water level is 92 ft below ground surface (middle half of wells: 50 ft–150 ft), from 128 measurements.

Drilled depth distribution

0–50 ft 6 50–100 ft 9 100–150 ft 22 150–200 ft 23 200–300 ft 26 300–400 ft 22 400–600 ft 27 600+ ft 16
Looking at a specific property in Hiland (82638)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hiland (82638)

Free. Goes to licensed drillers working Natrona County.

Part of Natrona County well records.

Method: medians computed from State Engineer records (water well permits only — coalbed-methane, monitoring and test wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.