⟁ Wyoming Well Data field records · 2026 survey

Wyoming Well Data › Campbell County › Wright (82732)

Wright, WY (82732): well depth, water level & drilling cost

✓ 2,276 State Engineer records · Campbell County

376 ftmedian well depth
220 ft–800 fttypical depth range
201 ftmedian static water level
25 gpmmedian yield (2,131 tests)

Pull every recorded well near a Wright (82732) address — $49

How deep are wells in and around Wright (82732), Wyoming?

The median drilled well depth in and around Wright (82732) is 376 ft, based on 1,494 wells with recorded depths in the state State Engineer database. Half fall between 220 ft and 800 ft; 90% are shallower than 1,073 ft.

How much does it cost to drill a well in and around Wright (82732)?

Applying published per-foot rates to the local median depth of 376 ft: drilling and casing alone typically runs $9,400–$24,440; a complete system including pump, pressure tank, and hookup typically runs $22,560–$37,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wright (82732)?

The median static water level is 201 ft below ground surface (middle half of wells: 80 ft–450 ft), from 1,457 measurements.

Drilled depth distribution

0–50 ft 29 50–100 ft 48 100–150 ft 89 150–200 ft 109 200–300 ft 331 300–400 ft 181 400–600 ft 142 600+ ft 565
Looking at a specific property in Wright (82732)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wright (82732)

Free. Goes to licensed drillers working Campbell County.

Part of Campbell County well records.

Method: medians computed from State Engineer records (water well permits only — coalbed-methane, monitoring and test wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.