Wyoming Well Data › Sweetwater County › Rock Springs (82902)
Rock Springs, WY (82902): well depth, water level & drilling cost
✓ 119 State Engineer records · Sweetwater County
Pull every recorded well near a Rock Springs (82902) address — $49
How deep are wells in and around Rock Springs (82902), Wyoming?
The median drilled well depth in and around Rock Springs (82902) is 113 ft, based on 81 wells with recorded depths in the state State Engineer database. Half fall between 60 ft and 245 ft; 90% are shallower than 310 ft.
How much does it cost to drill a well in and around Rock Springs (82902)?
Applying published per-foot rates to the local median depth of 113 ft: drilling and casing alone typically runs $2,825–$7,345; a complete system including pump, pressure tank, and hookup typically runs $6,780–$11,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Rock Springs (82902)?
The median static water level is 30 ft below ground surface (middle half of wells: 11 ft–55 ft), from 76 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Sweetwater County.
Part of Sweetwater County well records.
Method: medians computed from State Engineer records (water well permits only — coalbed-methane, monitoring and test wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.