⟁ Wyoming Well Data field records · 2026 survey

Wyoming Well Data › Converse County

Converse County, Wyoming: well depth, water level & drilling cost

✓ 8,139 State Engineer records through 2026-08-12 · checked 2026-09-28

210 ftmedian well depth
110 ft–400 fttypical depth range
65 ftmedian static water level
15 gpmmedian yield (7,687 tests)

Pull every recorded well near a Converse County address — $49

How deep are wells in Converse County, Wyoming?

The median drilled well depth in Converse County is 210 ft, based on 5,767 wells with recorded depths in the state State Engineer database. Half of all wells fall between 110 ft and 400 ft; 90% are shallower than 759 ft. Wells on permits filed since 2016 have a median recorded depth of 300 ft.

How much does it cost to drill a well in Converse County?

Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Converse County?

The median static water level is 65 ft below ground surface (middle half of wells: 28 ft–140 ft), from 5,142 measurements.

How much water do wells in Converse County produce?

The median tested yield is 15 gpm (middle half: 7 gpm–25 gpm), from 7,687 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 581 50–100 ft 600 100–150 ft 785 150–200 ft 675 200–300 ft 973 300–400 ft 629 400–600 ft 644 600+ ft 880
Looking at a specific property in Converse County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Converse County

Free. Goes to licensed drillers working Converse County.

Well records by ZIP code in Converse County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from State Engineer records (water well permits only — coalbed-methane, monitoring and test wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.