⟁ Wyoming Well Data field records · 2026 survey

Wyoming Well Data › Converse County › Glenrock (82637)

Glenrock, WY (82637): well depth, water level & drilling cost

✓ 1,157 State Engineer records · Converse County

200 ftmedian well depth
78 ft–330 fttypical depth range
38 ftmedian static water level
15 gpmmedian yield (1,112 tests)

Pull every recorded well near a Glenrock (82637) address — $49

How deep are wells in and around Glenrock (82637), Wyoming?

The median drilled well depth in and around Glenrock (82637) is 200 ft, based on 783 wells with recorded depths in the state State Engineer database. Half fall between 78 ft and 330 ft; 90% are shallower than 705 ft.

How much does it cost to drill a well in and around Glenrock (82637)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Glenrock (82637)?

The median static water level is 38 ft below ground surface (middle half of wells: 12 ft–89 ft), from 718 measurements.

Drilled depth distribution

0–50 ft 157 50–100 ft 74 100–150 ft 91 150–200 ft 59 200–300 ft 140 300–400 ft 104 400–600 ft 66 600+ ft 92
Looking at a specific property in Glenrock (82637)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Glenrock (82637)

Free. Goes to licensed drillers working Converse County.

Part of Converse County well records.

Method: medians computed from State Engineer records (water well permits only — coalbed-methane, monitoring and test wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.