Wyoming Well Data · State Engineer
State Engineer well records, searchable by address
Every Wyoming well log is filed with the Wyoming State Engineer's Office e-Permit well permit database (WSGS bulk extract + e-Permit top-ups). Those records are public, but they are organized by mapped location and record number — not by street address. We hold 161,037 of them and rebuild the index weekly, so you can start from an address instead.
✓ State Engineer records through 2023-09-01 · checked 2026-07-28
Enter any Wyoming address and we return the wells recorded around it — wells are plotted at the coordinates recorded in the State Engineer’s Office e-Permit database — quarter-quarter-section locations on older permits (roughly ±0.5 mi), closer on recent ones.
Free address lookup Full property report — $19What a State Engineer record contains
Not every filed report carries every field — older records are thinner, and what the state captured changed over the decades. This is the real coverage across all 161,037 records, so you know what to expect before you search.
| Field | What it tells you | Records with it | Coverage |
|---|---|---|---|
| Mapped location | Coordinates, so the log can be found by address instead of by record number. | 161,037 (100%) | |
| Date completed | When the well was finished and the log filed. | 161,030 (100%) | |
| Tested yield | Gallons per minute the well produced on the driller’s pump test. | 152,460 (95%) | |
| Total depth | How deep the hole was drilled, in feet. | 113,547 (71%) | |
| Static water level | How far below the surface the water stood at rest. | 103,822 (64%) |
How this differs from going to the Wyoming State Engineer’s Office directly
Nothing here replaces the official record, and for a single well you already have the record number for, the Wyoming State Engineer’s Office is the place to go (seoweb.wyo.gov/e-Permit). What this site adds is the part that is hard from the source data:
- An address is enough. You do not need a record number, a section-township-range, or a latitude to start. Wells are plotted at the coordinates recorded in the State Engineer’s Office e-Permit database — quarter-quarter-section locations on older permits (roughly ±0.5 mi), closer on recent ones.
- The neighbours, not just the well. Buyers and lenders care what depth and yield are normal nearby, which means reading many records at once, not one.
- The same statistics everywhere. Median depth, static water level and yield are computed identically in every county, so two counties can actually be compared. The exact filters are on the methodology page.
State Engineer records by county
See all 23 Wyoming counties → · What a Wyoming well log contains →
Common questions
With State Engineer — the Wyoming State Engineer's Office e-Permit well permit database (WSGS bulk extract + e-Permit top-ups). Every Wyoming driller files a completion report there for each well drilled, and that filing is the authoritative copy of the record. The official site is seoweb.wyo.gov/e-Permit.
Not directly — well records are filed against a mapped location and a record number, not a mailing address, which is the single most common reason people give up on the search. That is exactly the gap this site fills: enter an address on our free lookup and we return the recorded wells around that point, wells are plotted at the coordinates recorded in the State Engineer’s Office e-Permit database — quarter-quarter-section locations on older permits (roughly ±0.5 mi), closer on recent ones.
No, and it is not meant to be. This is an independent index built from the data the Wyoming State Engineer’s Office publishes, rebuilt weekly. For the authoritative copy of any single record, go to the Wyoming State Engineer’s Office directly. If our copy and the state's ever disagree, the state's is right.
Our current copy holds 161,037 records across 23 counties, with completion dates from 1867 to 2023. That is everything State Engineer publishes in its bulk record set as of 2026-07-28. Wells drilled before the state's filing requirement — and hand-dug or unpermitted wells — were never filed anywhere, so they are in neither copy.
Searching by address here is free, the same as searching State Engineer is free. What we charge for is the compiled property report — every recorded well near one address, with the statistics and the original log links, as one printable document for a sale or a loan file. That is $19.
The property report pulls every recorded well near an address — depths, water levels, yields, drillers — as one printable summary for due diligence.
Property report — $19Driller, agent, or inspector pulling these regularly? Unlimited & white-label plans →